 |
Unthread the three handles mounted on the top of the tank and lift off
the lid. Place an uncapped material bottle in the center of the pressure
tank. Return the lid to the top of the pressure tank while assuring the
dip tube is positioned inside bottle of fluid. Tighten handles evenly.
Connect the material line to the fluid delivery system. Turn the red
handle 90 degrees to open the air inlet supplying pressure to the tank
then adjust the regulator to the correct pressure setting
and you
are ready to dispense. |
|
Also in this Category:
1 LB Pressure Pot
1 Liter Pot
2 Liter Pot
1 Gallon Pot
2 Gallon Pot
5/10 Gallon Pot
Other Valves
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing |
To feed
any IDS valve, choose from our
dispensing syringes, (to feed
thin to medium materials in very small shots) our
single
cartridges, (for medium to thicker materials in
smaller shots or beads) or for large volume capacity, order one of
our
reservoirs (for thin to medium materials) or one of
our pail
dispenser units, for thicker materials. For a typical
valve setup,
click here.
2
Liter Pressure Pot
Features:
-
Safety air relief valve at 100 psi
-
Accepts bottles of material
-
Disposable material path
-
Teflon material line supplied with tank
-
Safe for use with UV and anaerobic materials
-
Top mounted air and material fittings
-
Three handles that lock into tank lid for a positive seal
2
Liter Pressure Pot Specifications
Inside Tank Dimensions:
6.0” diameter x 10.5” depth
Outside Tank Dimensions:
9” diameter x 14.5” height
Body of Tank:
Aluminum , black anodized
Gaskets:
(3) Viton O-Rings
Max Operating Pressure:
100 PSI
Air Inlet:
Quick connect air adapter
Material Fitting:
1/4” OD tube compression fitting • 3/8” OD tube optional
Safety:
100 PSI air safety pop valve
Order
7011010-2L
2 Liter UV Tank (2 Liter)
regulator, gauge
7011011-2L
O-ring for tank, 3 required
|
|
