If
you are not sure of the correct valve, use our
Valve Finder
Guide
or let IDS quote you on a specially
made valve or valve system;
and fill in the work sheet that best describes the material you
are using;
Request a Quote.
|
|
For details, specifications and features, click on
the pictures
in the left column or click on the links provided in the right hand overview
column. |
|
 |
Valve Controller for
small to large
shots or
beads, thin to thick materials,
suitable for
the complete line of
IntelliSpense™ valves and spray valves...more
|
|
 |
Front Closing
Valves will work in varied types of dispensing processes, in an automatic dispensing system,
robotic application or with a
benchtop controller...more
|
|
 |
High Pressure Spool Valve for
Thick Materials. To produce small to large shots or continuous beads,
this
high-pressure
valve will dispense
materials such as silicones, RTV's, sealants and greases...more
|
 |
Atomizing
Spray Valves
in flat or round. Eliminate some masking of components
with a concentrated spray pattern
0.25 to over 2" in width.
The lower air chamber forces the
needle to retract,
like a front closing valve...more
|
 |
The
Automatic Manual Diaphragm valve
(AMD, shown left) is
ideal for dispensing low to medium
viscosity fluids.
For a typical setup,
click here.
For manual or auto
operations,
tby hand or foot pedal...more
|
|
 |
MOD Manually Operated
Diaphragm Valve is ideal for
Cyanoacrylates and other low
to medium viscosity fluids, for operator-applied situations or
semi-automatic model (above) triggered by
a foot pedal...more |
 |
7030000
Diaphragm Valves for
Micro Shots to beads for
low viscosity materials such as
Cyanoacrylates.
Also in a
Medium to High
Viscosity
Spring Assisted
dual acting valve
for automated solutions...more
|
|
 |
Positive Displacement Metering Valves for
thin to thick materials and micro to small
shot sizes.
Suitable for benchtop or
automatic applications. Shot sizes
can be fine tuned by on some models...more
|
 |
Pinch Tube Valve for thin materials,
micro to small shots
of semi-viscous liquids including mixed two-part component fluids and
Cyanoacrylates.
Valve makes contact with fluid
only in the disposable tube assembly...more |
|
 |
Auger Screw Valves are excellent choices for medium to thick, filled materials.
Use the
Auger
Valve Controller to dispense. Suitable for medium to
high-viscosity pastes, epoxies, solder pastes and other filled
materials...more
|
 |
Twin Valve
for automation or handheld applications
for thin plural component bead, dot, potting, or encapsulation.
Integrated with our meter-mix solutions,
is compatible with a variety of disposable
static mixers...more |
|
 |
Dispensing stands allow syringe
barrels, cartridges, and valves to be
securely mounted for
use in any number of offline bench-top work stations. They are all specifically made for each application listed...more |
|
 |
Rugged
valve handles for auto and manual applications
from air driven, electric or
"dummy" handles for ergonomic comfort while dispensing
with any of our dispensing valves. Perfect for high-repetition or
prolonged use...more |
|
To feed any IDS valve, choose from our
dispensing syringes, (thin to medium
in small shots) our
single cartridges, (medium to thicker materials in smaller shots or
beads) or for large volume capacity, order one of our
reservoirs (for thin to medium
materials) or one of our
pail dispenser
units, for thicker materials.
If
you are not sure of the correct valve for your specific application, check
out our
Valve Finder Guide
or if
you want IDS to quote on a specially made valve or valve system,
click here and fill in the work sheet that best describes the
material you are using (single
or dual). While you are at it, send us the Technical Data
Sheets (TDS) for your material. Every little bit helps and the quote desk
has never complained about too much information.
Electronic files are best; send to:
service@dispensinglink.com
|