|
 |
Auger Valves are excellent choices for medium to thick, filled materials
suitable
for medium to
high-viscosity pastes, epoxies, and filled
materials. Capable of dispensing shot size of 0.020" (0.508mm), the valves
use an auger
drive to carry fluid to the dispense point.
|
|
Air pressure applied to your
choice of reservoir (syringe, cartridge or pressure pot)
forces the material into a chamber where the fluid
is carried forward by the turn of the screw. As the screw turns, the
material is eventually brought to the end of the chamber and exits
through a dispense tip or needle. The
IntelliSpense Screw Controller
will both regulate the air
pressure to keep the fluid
feeding the valve and
make it possible to adjust the time needed
to dispense the shot size required.
Screw Valves
work extremely well with greases,
pastes and all manner of filled materials. They can easily be
mounted on an IntelliSpense Robot
or used as a stand-alone work station, with a
stand or a
gun.
To feed any IDS valve, choose
from our dispensing syringes, (to feed
thin to medium materials in very small shots) our
single cartridges, (for medium
to thicker materials in smaller shots or beads) or for large volume
capacity, order one of our
reservoirs (for thin to medium materials) or one of our
pail dispenser units, for thicker
materials.
Auger Servo controlled valves are
controlled by the
IntelliSpense™
Screw Controller.
Features
-
Choose 8,
16, or 32 pitch SS auger
for custom dispensing characteristics.
-
3,5,10,or 30cc/ml syringe barrel holder.
-
Disposable feed tube connects syringe to the
fluid body.
-
Virtually zero dead space within the valve
design.
-
24V DC servo motor drive with optional encoder
to provide displacement feedback.
-
Adjustable auger speed and reverse motion for
clean cycle stops
|
