 |
7040000
for Medium to High
Viscosity materials, with
Spring Assisted CA Valve accuracy. The 7040000 high viscosity,
dual acting diaphragm valve
(left) is designed
specifically for automated solutions and for dot,
bead, and potting
with higher viscosity materials.
For a typical valve
setup,
click here.
|
|
In this Category:
MOD Diaphragm
AMD Diaphragm
Auto Diaphragm
Dual Acting
Other Valves
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
|
|
The 7040000
is ideal for Cyanoacrylate , Anaerobic, or other low to medium viscosity
fluids utilizing a double-acting
air body with a spring loaded piston on top of the
diaphragm to easily dispense higher viscosity CA
or other types of anaerobic
(moisture sensitive, caused by exposure to air) fluids.
The double acting air body actuates to lift the piston off the
diaphragm, so it can
move upward and allow material to flow.
Because of the spring
assist, this valve will work with more viscous (thicker) materials and will
also provide a sharp cut off.
Features
-
Patented silicone disk,
Teflon film
embedded on the wetted side.*
-
Stroke Adjuster permits control over flow
rate.
-
Spring-assisted valve closure for reliable
cycle stops.
-
Delrin material body.*
-
Divorced valve design.
-
Prevents material
contamination of the air body.
Part #
Automation Diaphragm Valves
and Part Kits
7040000 Automation
Dual Acting w/ plunger, spring Non SS
7040000SP Diaphragm
valve-Dual Acting w/ plunger and spring Kit
7010012 System
includes:
(1)
Dual Acting Automation CA Valve w/plunger & spring, (1) 7011010, (1) Valve
Controller,(1) Valve Stand, all necessary lines, couplings and fittings.
Drawing for Dual Acting w/ plunger
|
|
