 |
Polyethylene Cartridge Nozzles
for dispensing in straight and bent nozzles.
Nozzles provide a wide range of
application capabilities. Tapered nozzles may be cut back to
increase opening. Nozzles have 1/4" NPT
threaded ends and accept SS Needle
Nozzles available in 1/4" NPT.
Each nozzle comes with a precut opening on the narrow end of the part
(the orifice) and it is either 1/8" or 1/16" with the exception of
8880061S, which has no
opening molded into it. The reason for the different openings is to
allow for different width beads. Some nozzles are molded into angles to
help facilitate dispensing into difficult to reach areas. See below for
more. |
|
In this category;
Cartridge Guns
Cartridges
Cartridge Plungers
Cartridge Nozzles
Spreader Nozzles
End & Tip Caps
Accessories
What Will a Cartridge Hold?
You may also need:
Needle
Nozzles
Cartridge Guns
Syringe Filler
Needle
Nozzles
Pail Dispenser
Syringes
Other Dispensers
Also related:
Syringe Filler
Needles
& Tips
Dispensing
Help
Doming & Potting |
Nozzles can be "cut back" from the tip
to open them more, but if you want a wide or thick bead, consider
pre-molded Spreader Nozzles, which will give you a beveled and finished
look. The molded shut tip on the 8880061S
is popular with users who are shipping or
transporting a filled cartridge and wish to leave the nozzle on instead of
using a tip cap. The length of
the nozzles (B) ranges from 2 to 4 inches, the width of all openings (A) is
1/4" and the hole in the tip (the orifice) measures from 1/32" to 1/8". All
nozzles are .44" in diameter.
Cartridge Nozzle Dimensions and IDS Part Numbers
|
OD (A)
|
Length (B) |
Orifice (C) |
|
|
|
|
0.44" |
2.6" |
0.063" |
|
0.44" |
2.6" |
0.125" |
|
0.44" |
4.0" |
0.063" |
|
0.44" |
4.0" |
0.125" |
|
0.44" |
4.0" |
0.031" |
|
0.44" |
4.0" |
0.094" |
|
0.44" |
6.0" |
0.063" |
|
0.44" |
6.0" |
0.125" |
Polyethylene Cartridge Nozzles
|
Order |
Description |
Qty |
|
|
|
|
8880056 |
2" X 1/16" Orifice |
1,000 |
|
8880057 |
2" X 1/16" Orifice |
50 |
|
|
|
|
8880058 |
2" X 1/8" Orifice |
1,000 |
|
8880059 |
2" X 1/8" Orifice - Low Density |
1,000 |
|
8880060 |
2" X 1/8" Orifice |
50 |
|
|
|
|
8880061 |
4" X 1/16" Orifice |
1,000 |
|
8880068 |
4" X 1/16" Orifice |
50 |
|
8880061S |
4" X 1/16" NO Orifice - tip end molded shut. |
1,000 |
|
8880067 |
4" X 1/16" Orifice - Low Density |
1,000 |
|
|
|
|
8880062 |
4" 1/16" Orifice - Bent 20 Deg X 1.5" |
1,000 |
|
8880063 |
4" 1/16" Orifice - Bent 30 Deg X 1" |
1,000 |
|
8880064 |
4" 1/16" Orifice - Bent 30 Deg X 2" |
1,000 |
|
8880065 |
4" 1/16" Orifice - Bent 45 Deg X 1" |
1,000 |
|
8880066 |
4" 1/16" Orifice - Bent 80 Deg X 1.5" |
1,000 |
|
|
|
|
8880069 |
4" X 1/8" Orifice |
1,000 |
|
8880070 |
4" X 1/8" Orifice |
50 |
|
|
|
|
8880071 |
4" X 1/32" Orifice |
1,000 |
|
8880073 |
4" X 1/32" Orifice |
50 |
|
8880072 |
4" X 1/32" Orifice - Low Density |
1,000 |
|
|
|
|
8880074 |
4" X 3/32" Orifice |
1,000 |
|
8880075 |
4" X 3/32" Orifice |
50 |
|
|
|
|
8880076 |
6" X 1/16" Orifice |
1,000 |
|
8880077 |
6" X 1/16" Orifice |
50 |
|
|
|
|
8880078 |
6" X 1/8" Orifice |
1,000 |
|
8880081 |
6" X 1/8" Orifice |
50 |
|
|
|
|
8880079 |
6" X 1/8" Orifice Bent 30 Deg X 2" |
1,000 |
|
8880080 |
6" X 1/8" Orifice Bent 45 Deg X 1.5" |
1,000 |
|
|
|
|
|
|
