|
| |
|
For details, specifications and features, click on pictures in the
left column
or on the orange inks provided in the right overview
column. |
|
|
 |
Syringe Guns
for manual dispensing of medium to thick viscosity materials.
The lightweight
plastic body holds any of the specially designed
standard
pneumatic syringe barrel and pistons
used in our shot meters and other dispensers for simple, accurate,
metered shot.
Does not work with Manual Syringes. Available in 5, 10, or 30/55cc/ml...more |
|
Also in this Category:
Syringe Filler
Pail Dispenser
Accessories
You may also need:
Syringes
Tip Caps
End
Caps
Syringe
Adater
Finger
Switch
Syringe
Filler
Syringe Filling
Also related:
Needles
& Tips
Accessories
Dispensing Help
Doming & Potting
Solder Dispensing
Premixed/Frozen
|
 |
Flux pens
apply no-clean flux, RMA, solvents,
lubricants, masking and water-based liquids, prevent
evaporation of material and conform to current regulations for
controlling substances capable of evaporation hazard.
Release material in controlled
amounts to the nib (tip)...more |
|
 |
Air Free Vacuum Pick-up Pen for
easy handling of
small components,
airless. Can pick up to 120g
weight. Unit comes complete with Anti-static
design suction pen, suction pads and air hoses for sensitive parts...more |
|
 |
Automatic
and semi-automatic
Pail Dispenser
extrudes
material from a bulk source.
Pump
bodies are fitted with a wiper-plate that
seals and
follows the material as the level drops to wipe the can,
eliminating waste. For use with any
straight wall pail...more |
|
 |
Syringe
Filling Stations
allow you to fill syringes simply and economically
using
standard cartridges. Includes cartridge retainer, cap and air
regulator, brackets & stand. Available in a
heavy duty, upright model that can use 32 oz. cartridges...more
|
|
 |
Fluid and air connectors, elbow fittings, material lines
and more, we offer a variety of
Accessories
for all of our IntelliSpense equipment, including air and
fluid fittings, adapters and our pneumatic
controls. For pictures and
part numbers, click on picture at left. |
|
Low viscosity liquids, such as solvents and
marking inks, are no exception.
IDS offers several syringe-based
dispensing options
(choose
from links at left or click on pictures below). We supply air powered and air free dispensers and a
variety of dispensing
valves and
valve controllers for dispensing single component
materials or for two component resin dispensers,
click here.
Pneumatic
dispensers (Analog or Digital) deliver a
measured amount of air pressure, for a measured amount
of time, to a pre-filled
syringe barrel. This controlled shot of air pressure forces
material out of the delivery end of a disposable
syringe barrel, through a
dispensing tip and
on
to the surface of your substrate.
Please note:
Our positive
displacement and auger valves are more accurate than air free syringe
stepper dispensers and very similar to a front closing valve. While an air
free dispenser has some advantages, for exactness and repeatability, it is
impossible to top the performance of an IDS
Positive Displacement
Valve.
Need more help?
Call us if you
have any questions:
(818) 597-4300.
We guarantee an immediate call back.
|
| |
|
