|
| |
|
 |
Servo Rotary Dispense Table
is perfect for Speaker Assembly.
Z-axis tilt is easily adjusted to
dispense either on a vertical wall within a cylindrical part or on an
outside wall. Available in either a single or a dual
table model.
The system is programmable (through
built-in PLC) to control dispense delay,
rotation delay, degree of rotation and wait period before cycling.
Each side of the dual table is independent.
|
|
The system is easily configured for use with
a syringe or a valve or
a combination of one of each depending on need. Because each side
is independent, in the optional Dual Table Model, two completely different parts can be
loaded to make multi joining applications faster, or run the same parts to
increase throughput. The
two sides are individually programmable and configurable for syringe or
valve dispensing. Each side can run at any setting, leaving the operator
free to unload/load one side while the other is running. If the start button
for the side that is not running is pressed, it will begin to run after the
other side is finished, a semiautomatic mode to run at
higher speeds. |
|
RotarySpense Flexible Rotary Dispense System are
PLC Controlled (built in) with a Rotary Device on the Base of
the Unit. The Servo Driven Motor provides Rotation and features a Control Adjustment for Rotation Speed
and Degree of Rotation. The unit also includes a Z-Axis Slide, a built in Valve Controller
for dispensing operation and gives you the option to connect any valve. In
the two table version, there are optional dual Motors on the base, optional Dual Valves on Z-Slide
and a fully Programmable Control System
Additional
Features
- The independent support
struts allow you to
automatically dispense from nearly any angle; vertical, horizontal
or anything in-between.
- Speed, start and stop delays are fully programmable for
each side, or for one table in the single configuration.
- Graphical OIT, for setup and
informational display.
- Integrated dispensing control, no external dispenser is
required.
- Dispensing
valves are not included.
|
|
Order
6111117
RotarySpense Flexible Dual Table Dispense
System
6111118 RotarySpense Flexible Single Table Dispense
System
|
 |
| |
ReadyMax UV
UV Flood Systems
UV Spot Systems
UV Spot Meter
UV Accessories
Needles & Tips
All Metal
Precision
Economy
Thin Wall Precision
Bent Needles
Aluminum
Crimped Needles
Tapered Tips
Flexible Tips
Teflon Needles
Oval Needles
Brush Tips
Pneumatic Syringes
Pneumatic Syringes
Pneumatic Pistons
Syringe Tip Caps
End Caps
Finger Switch
Syringe Adapters
Manual Syringes
Luer Lock
Luer Slip
Polycarbonate
Cartridge Guns
Manual Guns
Pneumatic Guns
Syringe Filler
Small Stands
Larger Stands
Cartridges
Cartridges
Cartridge Nozzles
Spreader Nozzles
End & Tip Caps
Dual Guns and Mixers
50ML Guns & Mixers
2000ML Guns & Mixers
400ML Guns & Mixers
|
