|
The IntelliSpense Syringe Gun features a
robust, lightweight design, 7:1 ratio leverage, slight rod reverse to
prevent drips and provides a very comfortable hand grip. For lines,
dots or potting, guns come in a variety of sizes. Use IntelliSpense
syringes,
needles and
tips, sold separately.
If you do not have a pre-filled syringe,
let IDS
quote you on pre-filling
your materials
or fill your empty syringe using a
syringe filling
system. For
best results, order
taper tips
for dispensing the material and use
tip caps and end caps for storage, shipping
and capping off unused materials in the syringe.
Syringe Guns come as shown above, without
syringes,
needles and
tips, which are sold separately
in convenient boxes or in cost-saving bulk bags.
IDS Part# Manual Syringe Guns
8880369 10CC
Plastic Manual Syringe Gun (Complete)
8880369-P 10CC Plastic Manual Syringe Gun (Spare Plunger Rod)
8880370 30CC
Plastic Manual Syringe Gun (Complete)
8880370-P 30CC Plastic Manual Syringe Gun (Spare Plunger Rod)
8880371 55CC
Plastic Manual Syringe Gun (Complete)
8880371-P
55CC Plastic Manual Syringe Gun (Spare
Plunger Rod)
IntelliSpense Needles and Tips work with all
IntelliSpense™
Syringes,
Manual or Pneumatic, or any other
brand of Luer Lock or Luer Slip Syringe. All
Luer Slip and Luer Lock Syringes have
5/32“ OD and 1/8“ ID nipples.
Syringe volumes,
shot sizes and trigger
pulls;
When the trigger is pulled on the lntelliSpense Syringe
Gun, the notched plunger will advance in relation
to how far you pull before releasing.
10CC lntelliSpense Syringe Gun
- 2 teaspoonfuls
is equivalent to 10CC (or 10ML).
The smaller circumference of the 10CC syringe makes moving thick materials
easier and is not very long, keeping your hand close to the work.
1 full pull = 4 steps on plunger rod
1.08CC full pull
0.81CC 3/4 pull
0.54CC 1/2 pull
0.27CC 1/4 pull
30/55CC lntelliSpense Syringe Gun -
1 ounce is equivalent to 30 ml (30CC).
The 55CC Syringe uses the same gun as the 30CC, but comes with a longer plunger
and holds nearly two full ounces of your chosen material. Because the dimensions
are the same, the table below is true for both 30 and 55CC guns.
1 full pull = 4 steps on plunger rod
2.20CC per full pull.
1.65CC per 3/4 pull
1.10CC per 1/2 pull
0.55CC per 1/4 pull
|
